OpenStackstein安装（九）networkoption2-创新互联

Install and configure the Networking components on the controller node.

1. Install the components

   # yum install openstack-neutron openstack-neutron-ml2 \
     openstack-neutron-linuxbridge ebtables

2. Configure the server component

   Edit the /etc/neutron/neutron.conf file and complete the following actions:
   ○ In the [database] section, configure database access:
   [database]
   # ...
   connection = mysql+pymysql://neutron:neutron123@stack.flex.net/neutron
   注意：注释或移除其它连接选项在[database]区域中

○ In the [DEFAULT] section, enable the Modular Layer 2 (ML2) plug-in, router service, and overlapping IP addresses:
[DEFAULT]

...

core_plugin = ml2
service_plugins = router
allow_overlapping_ips = true

○ In the [DEFAULT] section, configure RabbitMQ message queue access:
[DEFAULT]

...

transport_url = rabbit://openstack:openstack123@dbs.flex.net

○ In the [DEFAULT] and [keystone_authtoken] sections, configure Identity service access:
[DEFAULT]

...

auth_strategy = keystone

[keystone_authtoken]
# ...
www_authenticate_uri = http://stack.flex.net:5000
auth_url = http://stack.flex.net:5000
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = neutron
password = neutron123
注意：注释或移除在[keystone_authtoken]区域中其它选项.

○ In the [DEFAULT] and [nova] sections, configure Networking to notify Compute of network topology changes:
[DEFAULT]

...

notify_nova_on_port_status_changes = true
notify_nova_on_port_data_changes = true

[nova]
# ...
auth_url = http://stack.flex.net:5000
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = nova
password = nova123

○ In the [oslo_concurrency] section, configure the lock path:
[oslo_concurrency]

...

lock_path = /var/lib/neutron/tmp

3. Configure the Modular Layer 2 (ML2) plug-in

The ML2 plug-in uses the Linux bridge mechanism to build layer-2 (bridging and switching) virtual networking infrastructure for instances.
Edit the /etc/neutron/plugins/ml2/ml2_conf.ini file and complete the following actions:

○ In the [ml2] section, enable flat, VLAN, and VXLAN networks:
[ml2]

...

type_drivers = flat,vlan,vxlan

○ In the [ml2] section, enable VXLAN self-service networks:
[ml2]

...

tenant_network_types = vxlan

○ In the [ml2] section, enable the Linux bridge and layer-2 population mechanisms:
[ml2]

...

mechanism_drivers = linuxbridge,l2population
注意：配置ML2插件后, 从type_drivers移除这个选项会导致数据库不一致并且Linux bridge只支持VXLAN overlay network.

○ In the [ml2] section, enable the port security extension driver:
[ml2]

...

extension_drivers = port_security

○ In the [ml2_type_flat] section, configure the provider virtual network as a flat network:
[ml2_type_flat]

...

flat_networks = provider

○ In the [ml2_type_vxlan] section, configure the VXLAN network identifier range for self-service networks:
[ml2_type_vxlan]

...

vni_ranges = 1:1000

○ In the [securitygroup] section, enable ipset to increase efficiency of security group rules:
[securitygroup]

...

enable_ipset = true

4. Configure the Linux bridge agent

The Linux bridge agent builds layer-2 (bridging and switching) virtual networking infrastructure for instances and handles security groups.
Edit the /etc/neutron/plugins/ml2/linuxbridge_agent.ini file and complete the following actions:

○ In the [linux_bridge] section, map the provider virtual network to the provider physical network interface:
[linux_bridge]
physical_interface_mappings = provider:external:eth2

Replace PROVIDER_INTERFACE_NAME with the name of the underlying provider physical network interface.

○ In the [vxlan] section, enable VXLAN overlay networks, configure the IP address of the physical network interface that handles overlay networks, and enable layer-2 population:
[vxlan]
enable_vxlan = true
local_ip = OVERLAY_INTERFACE_IP_ADDRESS
l2_population = true

Replace OVERLAY_INTERFACE_IP_ADDRESS with the IP address of the underlying physical network interface that handles overlay networks. The example architecture uses the management interface to tunnel traffic to the other nodes. Therefore, replace OVERLAY_INTERFACE_IP_ADDRESS with the management IP address of the controller node. See Host networking for more information.

○ In the [securitygroup] section, enable security groups and configure the Linux bridge iptables firewall driver:
[securitygroup]

...

enable_security_group = true
firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver

○ Ensure your Linux operating system kernel supports network bridge filters by verifying all the following sysctl values are set to 1:
net.bridge.bridge-nf-call-iptables
net.bridge.bridge-nf-call-ip6tables

To enable networking bridge support, typically the br_netfilter kernel module needs to be loaded. Check your operating system’s documentation for additional details on enabling this module.

5. Configure the layer-3 agent

The Layer-3 (L3) agent provides routing and NAT services for self-service virtual networks.
Edit the /etc/neutron/l3_agent.ini file and complete the following actions:

○ In the [DEFAULT] section, configure the Linux bridge interface driver and external network bridge:
[DEFAULT]

...

interface_driver = linuxbridge

6. Configure the DHCP agent

The DHCP agent provides DHCP services for virtual networks.
Edit the /etc/neutron/dhcp_agent.ini file and complete the following actions:

○ In the [DEFAULT] section, configure the Linux bridge interface driver, Dnsmasq DHCP driver, and enable isolated metadata so instances on provider networks can access metadata over the network:
[DEFAULT]

...

interface_driver = linuxbridge
dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq
enable_isolated_metadata = true
完成后返回网络配置

另外有需要云服务器可以了解下创新互联scvps.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。